AUTOMATIC SLEEVE WRAPPER MS 50 – 1 PLC

Machine Features.

• The feed belt is arranged perpendicular to the machine.
• The pneumatic pusher can preassemble multiple rows.
• The sealing bar is equipped with a film cutting blade to prevent smoke during sealing.
• The worktop has a height of 850 +/-25mm.
• A photoelectric cell is in place to stop the sealing bar if it encounters an obstacle.
• There is a 230mm passage opening beneath the sealing bar.
• The film reels are automatically wrapped using dragging rollers.
• Heat-shrinking film reels with a thickness between 35 and 100 microns and a max diameter of 300mm are used.
• The temperature of the sealing bar and tunnel is controlled by a PLC.
• The TOUCH interface can modify data and display alarms for resetting.
• Real-time monitoring of alarms and direct editing of machine settings is possible, with up to 10 formats able to be stored.
• The heat-shrinking tunnel is insulated with rock wool, heated with resistors, and has forced air circulation.
• The tunnel length is 1100mm with an air circulation system.
• There is an internal conveyor belt in the tunnel, driven by a gear motor with adjustable speed, and a thin steel mesh grate with side chains.
• A cycle switch allows for switching between automatic and manual modes.
• The machine’s installed power is 10kW, with an average electricity consumption reduction of approximately 40% during normal operation.
• Air consumption is 140 Nl/min, and pneumatic components use non-lubricated dry air.
• The power supply can be either 3 phases 220V or 400V 3 phases + N + T.
• The machines are compliant with Machinery Directive 2006/42/EC